Mez Forums

Jrichardson · Honda C90 Joined: 08 Jun 2009 Posts: 2

Hi people, i have built a megasquirt V2 and am struggling to understand where to go from here... i have all the main components fitted but dont know what to do with reguards to jump cables etc etc.

I am running a 2.0L opel ECOTEC engine and need assistance.

Does anyone know of someone in the UK that i could send the system too to get checked and finished?

Many thanks

Josh

Eliot · Posted: Tue Jun 09, 2009 3:41 pm Post subject:

Where are you based.
And what do you mean by the jump cables? The wiring from MS to your engine? or actually inside the MS box?
_________________
Eliot
www.mez.co.uk

Jrichardson · Honda C90 Joined: 08 Jun 2009 Posts: 2

Im in Hull.

I mean the wires inside the MS unit itself. reading through the assembly guide it states different wires need to be put in depending on the specific engine setup you will be running. The engine is standard, ie standard sensors etc.

Any sugestions?

Cheers Eliot

Eliot · Posted: Wed Jun 10, 2009 7:03 am Post subject:

Have you tried the MS forums and studied the docs? The information should be out there, if a little fragmented.
Find someone with the same setup as yours on msruns.com and ask questions there.
http://www.msruns.com/index.php
_________________
Eliot
www.mez.co.uk