Mez Forums

[wrightp]

Hi there

I have been searching forums for some information about Crane Adjustable Pushrods.

I am after one pushrod for use on my 5.0litre Rover V8 to help set the preload correctly. I am told that the Crane item is thinner (Made from better material than adjustables these days), and that the diameter is 3/16" instead of 5/16".

I am looking for as thin as possible to prevent any issue with clearance in the head.

Does anyone have one or know where I could get one?

I have seen a few sites that sell the modern day (Thicker) type but I am after the better quality thinner version as made by Crane.

Thanks

Phil.